Traffic Membranes
Dex-O-Tex Weatherwear
Dex-O-Text Weatherwear is the number one choice by architects and has a broad range of decorative finishes available, including many custom made looks and textures to satisfy the new age of architectural design. As a multi-layered, trowel applied waterproofing and wearing surface, it is designed for use as a pedestrian traffic bearing and waterproofing system. Suitable for use in many different applications including: sun decks, play roofs, observation decks, walkways, residential decks, commercial installations, and many more.
Advantages:
- Monolithic, including integral flashing.
- Slip-sheet permits "floating" over cracks in substrate.
- Installed only by Professional Factory Trained Dex-O-Tex Contractors.
- Easily Maintained
- Low Life Cycle Cost
- Environmentally Friendly - Low VOC, No Hydro Carbon, Solvents, or Isocyanates
Qualideck®
Qualideck® coating systems provide long-lasting, textured, monolithic coating systems that are designed for vehicular traffic, industrial flooring, pedestrian walkways, balconies and sports stadium use.
Qualideck® Traffic Coating Systems are designed to provide superior protection for concrete substrates against moisture intrusion and deterioration from chlorides and chemicals
Advanced Polymer Technology (APT) is committed to innovative solutions for the synthetic coatings industry through progressive polyurethane technology. This pursuit of excellence has resulted in the development and manufacture of a broad range of Qualipur high performance Synthetic Products, used in a multitude of applications worldwide. Even though APT products meet and exceed industry standard, the quest for even better solutions continues.
Coating Systems
Medium Duty – 40 Mils
- Top Coat – Q372 * (15 mils)
- Membrane Coat – Q252 (25 mils)
- Primer – Q152 (4 mils)
- Structural Slab
*For UV exposure, use Q512 Topcoat (15 mils)
Heavy Duty - 55 Mils
- Top Coat – Q372 * (15 mils)
- Intermediate Coat/Top Coat – Q372 (15 mils)
- Membrane Coat – Q252 (25 mils)
- Primer – Q152 (4 mils)
- Structural Slab
*For UV exposure, use Q512 Topcoat (15 mils)
Extra Heavy Duty - 65 Mils
- Top Coat – Q372* (15 mils)
- Intermediate Coat – Q372 (25 mils)
- Membrane Coat – Q252 (25 mils)
- Primer – Q152 (4 mils)
- Structural Slab
* For UV exposure, use Q512 Topcoat (15 mils)
Extreme Duty - 75 Mils
- Top Coat – Q372* (20 mils)
- Intermediate Coat – Q372 (30 mils)
- Membrane Coat – Q252 (25 mils)
- Primer – Q152 (4 mils)
- Structural Slab
* For UV exposure, use Q512 Topcoat (20 mils)
Application
Crack Repair
- Top Coat – Qualipur 372 (or Q512 for UV exposure)
- Intermediate Coat – Qualipur 372
- Membrane Coat – Qualipur 252
- Detail Coat – Qualipur 252 or 252HV
- Primer – Qualipur 152
- Structural Slab
- Cracks < 1/16″ (note: > 1/16″, refer to application guide)
Slab & Wall Detail - Bearing
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Detail Coat – Qualipur 252 or 252HV
- Primer – Qualipur 152
- Sealant Cove Joint
- Structural Slab
Slab & Wall Joint Detail
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Detail Coat – Qualipur 252 or 252HV
- Primer – Qualipur 152
- Sealant Cove Joint
- Structural Slab
Expansion Joint Detail > 1 inch
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Primer – Qualipur 152
- Header Material
- Expansion Joint
- Structural Slab
Expansion Joint Detail < 1 inch
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Primer – Qualipur 152
- Header Material
- Expansion Joint
- Structural Slab
Drain Detail
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Detail Coat – Quailpur 252 or 252HV
- Primer – Qualipur 152
- Structural Slab
Pipe Projection Detail
- Top coat – Qualipur 372 (or Q512 for UV exposure)
- Membrane Coat – Qualipur 252
- Detail Coat – Quailpur 252 or 252HV
- Primer – Qualipur 152
- Structural Slab